Hot restrike IgnitorZG 90 HG

Description

Hot restrike Ignitor “ZG90HG”

Features
Revolutionary system: no external power required, self-synchronisation with ballast

Ignitor for AC and DC- HQ and Xenon discharge lamps without grounded electrodes
operated electronic ballasts
Suitable for lamps with operating voltages up to 230V AC or DC
Nominal Current of up to 90 A
Threshold Voltage of about 285 V
Symmetrical ignition voltage 70 kVpp
Compliant to RoHS-directive
Self dynamical timing operation
Extremely low noise operation @ rectangle waveforms
Suitable for lamps with operating voltages up to 250 V AC
Nominal current of up to 60 A with natural convection
Self dynamical timing operation
Extremely low noise operation @ rectangular waveforms
DC-Impedance of about 1340 µOhms
terminals for M10 Screws and cable shoes
low size and weight: 2350g, 170mm x 125mm x 75.5mm (L x W x H)

For Manufacturer	Osram
Type (Osram)	HMI 12000, HMI 18000

TECHNICAL DATA
Rated current	90 A
Temporary over current < 2 min for lamp run up	300 A
Ignition voltage	±35 kV, 70 kVpp
Input voltage range	Up to 350V rectangular / threshold for ignition > 280 V, 0-500 Hz
Operation mode	Symmetrical
Ignition mode control	Self-stopping feature, ignition time < 1 sec.
Pulse rate	Approximately 300/sec.at 350 V rectangular input voltage
Repetition rate	Depending on ballast, a break of min. 5 sec. is required
Operating temperature	90°C max at potting surface near main coil
Cable length	As short as possible
Dimensions (L x W x H)	170mm x 123mm x 78mm
Weight:	2350 g
Connectors	Screw connector M10 for cable lugs