Electronic Xenon Ballast 100W
HBX 76
Electronic Control System for Xenon and Mercury Lamps with onboard Igniter
Electronic Control System for Xenon and Mercury Lamps with onboard Igniter
Features
- Power supply for metal halide or xenon filled short arc lamps
- Designed for xenon and mercury short arc lamps rated up to 100 W
- Output power customer selectable by DIL / 16 step-switch
- Capable to drive lamp voltages ranging from 8 to 45 V
- Certified by OSRAM and USHIO
- Input voltage range from 90 V AC to 264 V AC, power factor corrected line input, built-in EMI-filter: meets CE and FCC part “A”
- μP controlled, digital power management with high output stability over lamp lifetime
- Output short circuit protected
- Galvanic separation of lamp output and line input, thermal shut off at 90°C
- Indication function for end of lamp life selectable and shut off for lamp fail parameter
- Customer adjustable to less than 0.3% rms light flicker at all frequencies uninterr.
- Default light stability with modulation of less than ± 3% during full wave supply interruption
- Auxiliary regulated 12 V / 0.2 A output for fan drive (available only when lamp lit)
- Flexible design: new lamps and functions adaptable by software
ELECTRICAL DATA
All values are valid at 25 ± 5°C, unless otherwise noted
| INPUT DATA | |||||
|---|---|---|---|---|---|
| Nominal Operation | Symbol | Unit | Nominal | Tolerances | Remarks |
| Input voltage AC-Line | U | V AC | 100 - 240 | 90 - 264 | |
| System wattage | PLI | W | 140 | 60 - 145 | Depends on select |
| Input current | ILI | A | 0.22 - 1.65 | Depends on select | |
| Line frequency | Fin | Hz | 50/60 | 47 - 63 | |
| Line power factor | PFC | 1 | 1.0 | 0.92 - 1.0 | |
| OUTPUT DATA | |||||
|---|---|---|---|---|---|
| Ignition | Symbol | Unit | Nominal | Tolerances | Remarks |
| Ignition voltage | Uign | kVpeak | ± 14 | ± 12 - ± 17 | Load capacity < 20 pF |
| Ignition time | tign on | sec. | 1 | 0.9 - 1.1 | |
| RunMaximum cable length between ballast and lamp-up Operation | lmax | mm | 240 | max. 300 | Open ends |
| Nominal Operation | |||||
| Lamp voltage | ULa | V | 7.4 - 45 | ± 5% | Depends on lamp select |
| Lamp wattage | PLa | W | 50, 75, 100 | ± 2% | Selectable 50, 75, 100 |
| Lamp current | ILa | A | Depend on select | ||
| End-Of Life-Cut off voltage | U La, max | V | 45 | ± 2 V | |
| End-Of-Life-Cut off time | t EOL-Off | s | < 0.2 | ||
| HF-Ripple of output power | ∆ PLa,rip P La | % | < 3 p-p | 7.4 V - 45 V | |
| LIFETIME DATA · All values for Uu = 230 V mrs, Temperature at test point = 70°C | |||||
|---|---|---|---|---|---|
| Symbol | Unit | Nominal | Tolerances | Remarks | |
| Ballast lifetime | tLife | H | 25.000 | >25.000 | Acc. to MIL HDBK for nominal operation |
| GEOMETRY AND WEIGHT | |||||
|---|---|---|---|---|---|
| Symbol | Unit | Nominal | Tolerances | Remarks | |
| Length x width x height | L x W x H | mm | 128 x 86 x 53 | ||
| Housing | Closed case Al- U-profile | ||||
| Weight | WB | kg | 0.41 | ± 0.02 | ECS 100 DC-y (incl. Igniter) |
