Electronic Control Gear
350–850W
EBM 801 AC

Electronic Control Gear for AC Lamps 350–850 W

Kategorie: AC Lamps

Electronic Control Gear for AC Lamps 350–850 W

Features

Power supply for metal halide AC-lamps
Lamp power of 400 W, 500 W, 575 W, 600 W, 650 W, 700 W, 800 W, 850 W
Output power customer selectable by 16-step multimode switch with new redesigned type
Integrated lamp lifetime counter -only as option-
Input voltage range from 100 V AC to 240 V AC, power factor corrected line input
Special newly designed anti aging and anti abnormal arc control circuit for high optical reliability over extended lifetime
Output short circuit protected
Thermal shut off at 90°C
Shut off function for end of life and lamp fail parameter
Less than 1% rms light flicker at all frequencies
Auxiliary regulated 24 V / 0.1 A output for fan drive, (only available when lamp lit.)

ELECTRICAL DATA

All values are valid at 25 ± 5°C, unless otherwise noted.

INPUT DATA
Nominal Operation	Symbol	Unit	Nominal	Tolerances	Remarks
Input voltage AC-Line	U	V AC	100 - 240	90 - 264
System wattage	P_LI	W	400 - 950		Depends on select
Input current	I_LI	A		2 - 10	Depends on select
Line frequency	Fin	Hz	50/60	47 - 63
Line power factor	PFC	1	1.0	0.93 - 1.0
Other Operation Data
System wattage during ignition	P_lign	W	25	< 30
System wattage standbyoperation	P_LIStby	W	1	0.5 - 2.0

OUTPUT DATA
Ignition	Symbol	Unit	Nominal	Tolerances	Remarks
Ignition voltage	U_ign	kV_peak	±		No built-in ignitor
Ignition time	t_{ign on}	sec.	1	0.4 - 3.0	Dynamical
Run-up Operation
Run-up current	l_max	A	Up to 11 7.5	± 10%	Inside specified lamp- parameter 0 to 1 ms
In rush current	l_max	A	30	20 - 30	Attempts
Nominal Operation
Lamp voltage	U_La	V	35 - 140	± 5%	Depends on lamp select
Lamp wattage	P_La	W	400, 500, 575, 600, 650, 700, 800, 850	± 2%	Selectable by type (EBM 801 xx by switch)
Lamp current	I_La	A	3 - 12		Depend on select
End-Of Life-Cut off voltage	U_{La, max}	V	142.5	± 2V
End-Of-Life-Cut off time	t_EOL-Off	s	< 0.2
HF-Ripple of output power	∆ _PLa,rip P _La	%	< 1 p-p		Ul = 60 V or more
50 Hz - 60 Hz ripple		%	< 4 p-p		Ul = 60 V or more
Shift in output power with shift in input voltage	∆ P _La ∆ U _Ll	1		< 0.005	Within nominal values
Open circuit voltage	U _OCV	V	220	< 250