DC-Lamp Ignitor
60 Ampere
ZG 60 XE neo

gniter for low voltage DC-Lamps with Lamp-Current up to 60A.

Category: DC Igniters

Igniter for low voltage DC-Lamps with Lamp-Current up to 60A.

Features

Revolutionary drive system: needs no external power source,

self synchronisation with ballast

Igniter for DC-Xenon and Hg discharge lamps operated by electronic ballasts
Suitable for low voltage and high current DC lamps with lamp voltages up to 100 V DC
Nominal current of up to 60 A with natural convection
Maximal current of 80 A with additional airflow
Compliant to RoHS-directive 2002/95/EC
Self stopping operation (2sec)
DC-Impedance of about 1700 μΩ

Regulatory Specifications

Safety · According to IEC (UL) 60950-1

RoHS · According to 2002/95/EC

Technical Data

TECHNICAL DATA
Rated current	60A, no add cooling
Temporary over current < 3 min. within a period of 6 min.	100 A
Ignition voltage	Higher than 32 kVp (40 KV nominal)
Input voltage range	DC 0-160 V / threshold for ignition > 70 V
Operation mode	Asymmetrical: cathode or anode grounding
Ignition mode control	Self stopping igniter nearly 2 sec./self sourcing by ballast, no external source necessary
Pulse rate	Approximately 30/sec. @ 70 V
Repetition rate	Depend on ballast, break of min.10 sec. is required
Operating temperature	115°C max. @ Ignitioncoil TP 1 / 85°C @ TP 2
Cable length	HV to lamp 50 cm max., for hot re-ignition: short as possible
Dimensions (L x W x H)	115 x 103 x 30/45 mm
Weight	Roughly 720 g
Connectors	4 x M6 screw-terminals with nuts M6 for cable-shoes