HBX 3000

HBX Series

Xe / Hg Electronic Ballasts Power Ranges 50 – 3000W

ZG 90 HG

Hot restrike Ignitor “ZG90HG”

Revolutionary system: no external power required, self-synchronisation with ballast Features To the price Request

ZG 180 XE

ZG 60 Hg

Electronic Ballasts

Igniters

Lamp Cross Reference

ROTEC Lighting Product

lighting-technology . lamp cross reference . HBX 2000

Electronic Xenon PSU
2000W
HBX 2000

Modular Electronic Control Gear for DC short arc lamps up to 2000W

Description

Modular Electronic Control Gear for DC short arc lamps up to 2000W

Features

- Designed for Xenon short arc lamps rated up to 2200W/ 102A
- Output power selectable by control Voltage 0-5V and/or presetting by Hex switch and adjustment Pot
- Capable to drive lamp voltage range up to 40V (switch off @ 41V)
- Ballast boards inside has IEC(UL) 60601 approval
- Input voltage range from 110V AC to 240V AC, (90V-262V) PF corrected
- μP controlled, digital power management with high output stability over lamp Lifetime
- Output short circuit protected and “Arc to Ground” protected
- Operation with Cathode or Anode to Ground/PE possible
- Galvanic separation of lamp output to line input, thermal shut off at 90°C
- Shut off function for end of life and lamp fail parameter
- PSUs cascadable for use for higher wattage Xenon lamps
- Auxiliary regulated 24V/ 0.15A output for Subsystems, permanently available
- line input, built-in EMI-filter: meets CE and FCC

Additional information

For Manufacturer	Osram, Superior Quartz, Ushio
Type (Ushio)	UXL 2000
Type (Osram)	XBO 2000
Type (Superior Quartz)	2000X Series up

ELECTRICAL DATA

All values are valid at 25 ± 5°C, unless otherwise noted.

INPUT DATA
Nominal Operation	Symbol	Unit	Nominal	Tolerances	Remarks
Input voltage AC-Line	U	V AC	110-240	90-264	-
Input voltage DC-Line	U	V DC	150-320 DC-input is possible but not certified
System wattage	P_Line	W	-	1000-2400	Depends on P select
Input current	I_LI	A	-	32	Depends on P select
Line frequency	f _in	Hz	50/60	47-63	-
Line power factor	PFC	1	1.0	0.93 to 1.0	-
Line inrush current limiting	Apeak	-	50	Limiting Element will be shorted by Relais
Leakage Current to PE	I_{Leak_SA}	µA	<1000@230 V	-	Standalone

OTHER OPERATION DATA
	Symbol	Unit	Nominal	Tolerances	Remarks
System wattage during ignition	P_Line	W	100	<150	-
System wattage standby-operation	P_LIStby	W	5	<6	-

LAMP OUTPUT DATA
IGNITION	Symbol	Unit	Nominal	Tolerances	Remarks
Ignition voltage withZG120Xe	U_ign	kV_peak	36-46	-	Depends on ignitor
Ignition time	t_{ign out}	sec.	1	0.9-1.1	-
automatic restart counter		sec.	20	-	Attempts (Ballast)

Run-up Operation
	Symbol	Unit	Nominal	Tolerances	Remarks
Run-up Current = nominal	I_max	A	102		Inside specified lamp- parameter (select by preset switch)

NOMINAL OPERATION
	Symbol	Unit	Nominal	Tolerances	Remarks
Lamp voltage	U_La	V	22-40		PSU output NOT Ignitor input
Lamp wattage	P_La	W	1100 to 2400		Factory set-up 2000W
Lamp current	I_La	A	up to 102		Depend on set-up
End-Of Life-Cut off voltage	U_{La, max}	V	41	+/- 1V	After run-up completed
End-Of-Life-Cut off time	t_EOL-Off	S	<0.2
RF-Ripple of output power	∆P_Larip/ P_La	%	<1
50Hz-60Hz Ripple		%	<1 p-p	<4 p-p
Shift in output power with shift	∆P_La/	1		<0.005	with nominal values
in input voltage	∆U_LI
Open circuit voltage for ignition	U	V	110	105-160