HQF-C 3002

Description

Electronic Cabinet System for High Speed Camera Application and Stadium Floodlights with integrated Igniter.

Features

Power supply for AC-Lamps (e. g. HQI TS 2000 WDS)
Lamp power of fixed 2000 W
Qualified for applications in combination with high speed cameras
Extremely low light ripple < ± 1%
Isolated control interface (24 V control voltage supplied internally)
Thermal Sensor on board
μP controlled, Digital Power Management with high output stability over lamp lifetime
Shut off function for end of life and lamp fail parameter
Integrated fans and temperature-management
no external igniter necessary

All values are valid at 25 ± 5°C, unless otherwise noted.

INPUT DATA
Nominal Operation	Symbol	Unit	Nominal	Tolerances	Remarks
Input voltage L1, L2, L3	U	V AC	400	380 - 480
System wattage	P_LI	W	2100
Input current	I_{L1, 2, 3}	A	4.1		Per phase
Line frequency	Fin	Hz	50/60	47 - 63	Three phase
Line power factor	PFC	1	0.82		Per phase
Other Operation Data
System wattage during ignition	P_lign	W	500
System wattage standby-operation	P_LIStby	W	1

OUTPUT DATA
Ignition	Symbol	Unit	Nominal	Tolerances	Remarks
Ignition voltage	U_ign	kV_peak	± 3.5	3 - 5	Resonance Ignition
Ignition time	t_{ign on}	ms	1100	-	Ignition sequence, 4 attempts
Run-up Operation
Run-up current	l_max	A	16	± 10%
In rush current	l_max	A	6	± 10%	For 1..10s
Nominal Operation
Lamp voltage	U_La	V	200	± 10%
Lamp wattage	P_La	W	2000	± 3%
Lamp current	I_La	A	max. 13.5 A		P-controlled
HF-Ripple of output power	∆ _PLa,rip P _La	%	100		HF-operation mode
300 Hz ripple		%	< 1 % rms		Typ. < 1%
Shift in output power with shift in input voltage	∆ P _{La ∆ U _Ll}	1		< 0.01	Within nominal values
Open circuit voltage	U _OCV	V	3000 - 5000	± 10%	Resonant