HBX 3000

HBX Series

Xe / Hg Electronic Ballasts Power Ranges 50 – 3000W

ZG 90 HG

Hot restrike Ignitor “ZG90HG”

Revolutionary system: no external power required, self-synchronisation with ballast Features To the price Request

ZG 180 XE

ZG 60 Hg

Electronic Ballasts

Igniters

Lamp Cross Reference

ROTEC Lighting Product

2 x HBX 2000

Modular Electronic Control Gear for DC short arc lamps up to 2000W

Description

Modular Electronic Control Gear for DC short arc lamps up to 2000W

Features

- Designed for Xenon short arc lamps rated up to 2200W/ 102A
- Output power selectable by control Voltage 0-5V and/or presetting by Hex switch and adjustment Pot
- Capable to drive lamp voltage range up to 40V (switch off @ 41V)
- Ballast boards inside has IEC(UL) 60601 approval
- Input voltage range from 110V AC to 240V AC, (90V-262V) PF corrected
- μP controlled, digital power management with high output stability over lamp Lifetime
- Output short circuit protected and “Arc to Ground” protected
- Operation with Cathode or Anode to Ground/PE possible
- Galvanic separation of lamp output to line input, thermal shut off at 90°C
- Shut off function for end of life and lamp fail parameter
- PSUs cascadable for use for higher wattage Xenon lamps
- Auxiliary regulated 24V/ 0.15A output for Subsystems, permanently available
- line input, built-in EMI-filter: meets CE and FCC

Additional information

For Manufacturer	Osram, Superior Quartz, Ushio
Type (Ushio)	UXL 4000
Type (Osram)	XBO 4000, XBO 6000

ELECTRICAL DATA

All values are valid at 25 ± 5°C, unless otherwise noted.

INPUT DATA
Nominal Operation	Symbol	Unit	Nominal	Tolerances	Remarks
Input voltage AC-Line	U	V AC	110-240	90-264	-
Input voltage DC-Line	U	V DC	150-320 DC-input is possible but not certified
System wattage	P_Line	W	-	1000-2400	Depends on P select
Input current	I_LI	A	-	32	Depends on P select
Line frequency	f _in	Hz	50/60	47-63	-
Line power factor	PFC	1	1.0	0.93 to 1.0	-
Line inrush current limiting	Apeak	-	50	Limiting Element will be shorted by Relais
Leakage Current to PE	I_{Leak_SA}	µA	<1000@230 V	-	Standalone

OTHER OPERATION DATA
	Symbol	Unit	Nominal	Tolerances	Remarks
System wattage during ignition	P_Line	W	100	<150	-
System wattage standby-operation	P_LIStby	W	5	<6	-

LAMP OUTPUT DATA
IGNITION	Symbol	Unit	Nominal	Tolerances	Remarks
Ignition voltage withZG120Xe	U_ign	kV_peak	36-46	-	Depends on ignitor
Ignition time	t_{ign out}	sec.	1	0.9-1.1	-
automatic restart counter		sec.	20	-	Attempts (Ballast)

Run-up Operation
	Symbol	Unit	Nominal	Tolerances	Remarks
Run-up Current = nominal	I_max	A	102		Inside specified lamp- parameter (select by preset switch)

NOMINAL OPERATION
	Symbol	Unit	Nominal	Tolerances	Remarks
Lamp voltage	U_La	V	22-40		PSU output NOT Ignitor input
Lamp wattage	P_La	W	1100 to 2400		Factory set-up 2000W
Lamp current	I_La	A	up to 102		Depend on set-up
End-Of Life-Cut off voltage	U_{La, max}	V	41	+/- 1V	After run-up completed
End-Of-Life-Cut off time	t_EOL-Off	S	<0.2
RF-Ripple of output power	∆P_Larip/ P_La	%	<1
50Hz-60Hz Ripple		%	<1 p-p	<4 p-p
Shift in output power with shift	∆P_La/	1		<0.005	with nominal values
in input voltage	∆U_LI
Open circuit voltage for ignition	U	V	110	105-160